How Long Does It Take To Replace A Car Battery?

If you own a car, you must take a good look at its maintenance. Otherwise, it won't provide you satisfactory service.

As car owners, we must know which things to do to keep our car on the move. Replacing the battery is one of them. But the question that bothers us is how long does it take to replace a car battery.

Those who are first replacing a car battery are confused about how long it takes. But, no need to think much about it.

Because, today, we will discuss every relevant topic regarding the car battery replacing producers. So, scroll down till the end and get your confusion away.

How To Replace A Car Battery?

To know how long it takes to replace a car battery, understanding the changing process of it will help.

So, we would like to show you the method in a few simple ways. Most people who are eager to know how to replace a car battery will learn from here.

Tools you may require

- Socket wrench (10 mm)

- Socket wrench (13 mm)

Battery replacing procedure

1st step- Park your car on a level surface. And make sure it is away from water and any open spark flame. Put the vehicle in packing mode and get the key out of the ignition. Ensure there is no electricity drawn from the battery.

2nd step- Put your hand gloves and goggles on. Put the car on safety gear to be safe from the battery acid. Now open the hood.

3rd step- Find the battery place in the hood. You can locate it near the windshield in the left corner. You'll see two cables are attached to it.

4th step- The black cable attached to the battery is the ground (negative) terminal. First, you have to disconnect it. Keep in mind that you always have to detach this black cable to prevent short circuits.

5th step- Now separate the other cable. It is coloured red. To loosen the positive cable clamp, use the wrench.

6th step- Find the bolted bracket at the bottom of the battery and loosen it using the 13mm wrench. Get the battery out of the car and place it on a concrete surface.

7th step- Now it's time to set the new battery. Before settling the new battery, use the rust remover and scrape the battery cables with sandpapers. It will help in getting rid of any residues from the old battery.

8th step- Place the new battery in its place. Lock it in with the bracket. Use the 13mm wrench to tighten the bolt. To prevent corrosion and acidic build-ups, you can apply a light layer of dielectric grease on the two terminals.

9th step- Reconnect the red cable first. To tighten the bolt, use the 10mm socket wrench. Then reconnect the negative terminal.

10th step- Lastly, make sure that everything is in its place. Ensure there is no problem with the battery and the cable. Now close the hood, get in your car, start the engine, and make sure everything is up to the mark.

How Long Does It Take To Replace A Car Battery?

As you saw the method above, replacing a car battery is not a big deal. It barely takes half an hour. Specifically, it may take 15 to 20 mins to complete the procedure.

Yet, the duration often varies according to the car model, ease of accessing the battery and getting it out of the car.

Also, the experience of yours makes a difference in the time of replacing a car battery. If you are first-time doing it yourself, it may take a few times longer than an experienced mechanic.

How To Know If The Car Battery Needs To Be Replaced?

It's not a complex task to understand when you should change your car battery. A few things that we will discuss below will help you to understand the time of changing the battery.

So, if you want to know when your car needs a battery replacement, read the next part of our essay.

  • It takes a few times to start the engine:

It is the common symptom that lets you know that the battery is aged. It affects the internal parts and makes it hard to start the engine.

Whenever it happens, consider changing the battery.

  • Electronic failures and dimmed lights: 

The battery powers up all the electronic systems we know. And in the car, it's no different—the car battery powers up lights, car computers, and all the electronic accessories.

If all this equipment stops working, then you can assume that your car battery needs replacement.

The electrical system relies on reading voltages and a drop of voltages across the car’s ingredients. When the ECU goes over a strange voltage drop, the check engine lamp switches on.

Therefore, when the car battery is about to drain, it does not empower the correct voltage to run correctly; thus, the ECU scans a fault, and the check engine lamp turns ON.

  • Gas leakage:

A damaged battery can leak gas. Gas leaking is the chemical interaction inside the battery. So, whenever you smell the gas odour, change the battery as soon as possible.

  • Corroded Connectors:

If the car battery is wrong, it can cause an overcharge. And when it happens, it gets the battery acid out of the case and gets infected.

Therefore, you will see corrosion or some white ashes at the terminal of the battery. Soon after you locate this kind of condition, change the car battery.

Final words

Monitoring your car battery and changing it when needed is a crucial thing to do to maintain your car.

If you see any symptoms that we mentioned above, replace your car battery as soon as possible.

If you take care of your car, it will provide you with service as per your expectations. And if you face any trouble changing your car battery, let us know in your comment box. We will come with a better solution ASAP.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: